Saw Welding Diode Base
SAW is most suitable for heavy structural fabrication jobs where high production is required with excellent welding quality.Fast Production due to high deposition rate of weld material.Simple Operation.Low running cost.
EQUIPMENT CONSISTS OF : POWER SOURCE : Diode Base, CV Type, Most reliable & durable, Fitted with Amps & Volt Meter.
WELDING HEAD :
(Carriage Mounted / Boom Mounted) Four Alloy Steel Driven, Quick Changeover of Spool, ThyristorControlled DC Drive P.M. Motor to Control Speed of trolley & Wire.CONTROL PANEL:
All Control for Power Source Voltage Setting, Wire Feeder Motor, Carriage, Motor Speed, Reverse / Stop/ Forward Operation Provide on Control.
OPTIONAL:
Rotators (Fix / Self Centering)
Column boom
Welding Positioner.
Flux drying oven.
Flux recovery Units.
SET OF ACCESSORIES
Interconnecting Cable - 10 mtr.
Earthing Cable with Earth Clamp - 10mtr.
One spool of wire - 25Kg. Approx.
One bax of flux -25Kg. Approx.
Chipping Hammer & wire brushTechnical SpecificationsMODELSAW - 600SAW - 800SAW - 1000SAW - 1200Input Supply Voltage380 - 440 V380 - 440 V380 - 440 V380 - 440 VPhase3333Frequency50 Hz50 Hz50 Hz50 HzPrimary Current at max. Rated40 A55 A70 A83 AInsulation ClassHHHHWelding Current600 Amps800 Amps1000 Amps1200 AmpsO.C.V. (Setting)16 - 52 V16 - 52 V16 - 52 V16 - 52 VKVA31425264Type of CoolingForced AirForced AirForced AirForced Air
Ask for Price
Product Details :
| Minimum Order Quantity | 1 Set | | Automatic Grade | Automatic | | Output Current | 1000 AMPS | | Capacity | 1000 -1250 Amps | | Wire Diameter | 2.5MM TO 5.0MM | | Condition | New | | Phase | 3 | | Frequency | 50Hz | | Insulation | Class H | | Brand | Technoweld | | Amps Input At Rated Output | 1000 amps | | Cool Mode | Fan | | Cooling | Forced Air Cooled | | Flux Hopper With Valve | yes | | Wire Feed System | yes | | Wire Reel Holder | yes | | Heavy duty | Most reliable | | Input Supply Voltage | 415V | | Welding Type | SUBMERGED ARC WELDING | | Model Number | SAW 1000 |
Stainless Steel Cleaning Gel - Weldbrite
Description - Welbrite utilizes innovative Australian Technology for the formulation of a high adhesion stainless steel pickling gel. It is used to remove the black oxide marks or burn scale left during welding of stainless steel.
- After use of Welbrite the weld area should have the same look as the rest of the steel being used. Welbrite leaves a clean professionally finished stainless steel weld area.
Weld brite pickling gel
- Is a strong AST A 380 complaint formulation.
- A thick high adhesion gel.
- Effectively removes free iron.
- Provides fast ating, one step descaling.
- Completely water soluble.
- Weldbrite Pickling and cleaning of weld area and the heat affected zone
- Enhancement of the auto passivation process Efficiency in fabrication.
- Non residual treatment.
- Easy to use, even on vertical surfaces.
Physical properties
- Boiling Point : N/A
- Specific Gravity : 1.15
- Water Solubility : Miscible
- pH (as supplied) : Opaque, white acidic gel, pungent acidic odour
Packing sizes
- Weldbrite is available in 1 Kg., 2.5 Kg. And 25 Kg. Pack
Ask for Price
Product Details :
| Minimum Order Quantity | 1 Set | | Automatic Grade | Automatic | | Output Current | 1000 AMPS | | Capacity | 1000 -1250 Amps | | Wire Diameter | 2.5MM TO 5.0MM | | Condition | New | | Phase | 3 | | Frequency | 50Hz | | Insulation | Class H | | Brand | Technoweld | | Amps Input At Rated Output | 1000 amps | | Cool Mode | Fan | | Cooling | Forced Air Cooled | | Flux Hopper With Valve | yes | | Wire Feed System | yes | | Wire Reel Holder | yes | | Heavy duty | Most reliable | | Input Supply Voltage | 415V | | Welding Type | SUBMERGED ARC WELDING | | Model Number | SAW 1000 |
|
© Welding Aids. All Rights Reserved (Terms
of Use)
