Welding Aids

1. Pre-clean inspection area with CLEANER SC-30 to remove oil, grease or with wire brush to remove Scale, rust for easier penetration.
2. Spray or brush with PENETRANT SC-10 Allow penetration time as per table below.
   Area coverage 50Sq mts/ lit. appox.
3. Wipe Surface Clear, using Cloth Soaked in CLEANER SC-30, Taking care. Penetrant from defect should not be removed
4. Shake the Aerosol can vigorously or stir the bulk developer. Spray DEVELOPER SC-20 in thin, uniform film, from a distance of 8 to 12 inches and 6-8 short sections at a time. Allow to dry.
   Area coverage 25 Sq mts/ lit. appox.
5. The vived red colour combined with better capibility action results in sharply defined flaw indication

The Dye-penetrant method of in spection with flaw test System may be used on materials Such as Aluminium, Magnesium, Barss, Copper, Cast Iron, Steel, Stainless Steel, Ceramic & Certain Plastics.
Minimun Penetration Time For Penetrants, For Parts-Having Temperature of 15C to 35C

• Each of above product is available in standard 300 gms aerosol cans or 1 & 5 litres carbouys
• Due to continuos development. We reserve the right to modify specification without notice
• Flaw test must be used in a well ventilated space such that Vapours are carried away